Basic Information About Dual Handle Faucet

Basic Information About Dual Handle Faucet

Faucets are something we come into contact with every day, whether in public places or private homes. However, there are many different types of kitchen faucets, and different kitchen faucets have different functional features, such as our dual-handle faucet. Below is the basic information about our dual-handle faucet.

The following is a list of contents:

·Introduction of dual-handle faucet

·Types of dual-handle faucets

·Dual handle faucet installation method

·Dual handle faucet repair method

Introduction of dual-handle faucet

The dual-handle kitchen faucet is a faucet where cold water and hot water are separated and controlled by two valves, one faucet for hot water and the other for cold water. Many households use gas water heaters, so it is more convenient to use a dual-handle faucet in the kitchen at this time, it can adjust the water temperature according to personal preferences.

Types of dual-handle faucets

1, Tabletop dual handle faucet.

The hole on the kitchen sink determines whether you can use this type of kitchen faucet, and the two handles control cold and hot water respectively. If you have small children at home, then the design of this type of faucet is safer, which can not distinguish between cold water, and hot water and cause scalding problems will be prevented as far as possible.

2, Wall-mounted double faucet.

According to preference, randomly with different types of kitchen sinks, and make full use of the wall above the kitchen sink, both to save space, but also very beautiful.

Dual handle faucet installation method

The dual-handle faucet's reserved pipe head is generally the elbow of the internal connection wire, and should be in the pre-buried pipe when the faucet intersection of the pipe fitting interface and the wall flush with the finished decoration, should generally consider the depth of the pipe groove, mortar, the thickness of the waterproof layer and the thickness of the tile. In this way, the installation of the faucet can be beautiful and sturdy. Dual handle kitchen faucet after installation, not the outflow of water immediately take to drink, should flow for some time, and the outflow of water can be used to flush the toilet, floor, etc. when the outflow of water no longer contains sandpaper, dirt and other impurities, you can use the faucet normally.

Dual handle faucet repair method

1, First prepare a screwdriver, active wrench, and penetrating lubricant, remove the handle of the dual handle faucet, check the components of the faucet, and use the active wrench to remove the nut. Then remove the screw above the electric ring, and then check whether the spool and screws are damaged. If there is damage to the case, immediately replace it.

2, Then replace the old washer with a new one, which can make the faucet no longer leak. Follow up when replacing the washer, check the old washer is flat or beveled, and then choose the same washer for replacement. If the faucet washer replacement after there is leakage, then it may be the faucet seat is bad, then you should contact the professional to replace the new seat.

Nanjing Victor has its factory in Jiangsu and Guangzhou, so far our products are widely exported to the United States, Europe, Asia, South America, Southeast Asia, the Middle East, Africa, and other places. Above is the basic information about our kitchen double-handle faucet, if you are interested in our kitchen faucet, please contact us, our website is https://www.njvictor.com/, we are looking forward to your arrival.